Seamless look and feel for you pool.
UV Stabalised Advanced polymer construction
No equipotential earth bonding required
Meets Australian standards
Easy installation
Advanced polymer pool systems including skimmer lid systems and Spa Air Control Systems
invisiskim pool systems
Invisiskim
Taking the finish of your pool to the next level
Invisiskim
Giving your pool a million dollar feel
Invisiskim
where safety meets the future of swimming pools
INVISISKIM will help to make your new pool look fantastic!
quick installation no electrician required long lasting solutions
Click below for more details.
Australian designed and made in Australia using advanced additive manufacturing processes.
Advanced polymer Acrylonitrile Styrene Acrylate products which are tougher than ABS and PVC with the added benefit of being UV Resistant
INVISISKIM POOL SYSTEMS
Let's get a bit technical shall we
Skimmer Lid System Details
Why Invisiskim?
The purchase price of our Polymer Skimmer Lid system is usually less than the steel options available PLUS a huge saving on the electrical costs not required.
Why Invisiskim?
Fully meets Australian Safety Standards AS 1926.3-2010 Amnt 1
Why Invisiskim?
Our design includes unique fdeatures like a self centering lid and levelling access points for installing a paver in the lid etc.
Why Invisiskim?
Our system is the only one that actually has a vented lid with a min 315mm2 vent as required by AS 1926.3-2010 Amnt 1.
Why Invisiskim?
Our lid removal system is unique and required a tool that is included. This system makes removing the lid simple, easy, safe and also incorporates the required sized vent.
Why Invisiskim?
Our lifting system has been designed so that your installer can get the centre lifting point/vent perfect every time!
Why Invisiskim?
Can accommodate up to a 40mm thick paver. 30mm and 40mm pavers are perfect. However, for thinner pavers (ie 20mm) additional masonry material will be required to increase the total weight of the lid to meet Australian Standards 1926.3-0210 Amnt 1. All non-locking skimmer lids, including the paver weight, require 100N of force to lift - for safety reasons (100 N of force is equal to 10.19) kg
Why Invisiskim?
Fully Non conductive so no need for an electrician to connect an earth wire as per AS NZS 3000-2007 Amdt 2-2012 saving big $$$$$
Let's get a bit technical shall we
Spa Jet Air Control System
Why Invisiskim?
The purchase price of our Polymer Spa Jet Air Control System is reasonable and comparable to other options.
Why Invisiskim?
Longer lasting thermo-plastic is used which is UV stabalised for a longer lifespan.
Why Invisiskim?
Our design includes unique features like a larger top cap to cover the drill hole in the concrete, decking or paver etc.
Why Invisiskim?
Our push-in Air Controls are suited for 25mm (1") uPVC pipe with a self-levelling design (in-case your pipe is not 100% plumb)
Why Invisiskim?
The ASA Thermoplastic used is as strong as ABA plastic but has the added benifet of being UV Stabalised
Why Invisiskim?
Comes is a modern grey colour which suits modern pavers, decking and even modern coloured pools
Why ASA?
ASA (Acrylonitrile Styrene Acrylate) has very good Mechanical & Thermal Behavior. It’s tensile strength is typically around 40–50 MPa. It has a very high HDT (Heat Deflection Temperature) around 90 °C so is compatible with full sun and the elements. It has excellent impact resistance and durability in outdoor exposure. ASA is UV, Weather & Chemical Resistant. The acrylate component gives ASA superior UV resistance and less yellowing than ABS under sunlight. It also resists water, moisture, and many cleaning agents/chemicals
Why Invisiskim?
Fully Non conductive so no need for an electrician to connect an earth wire as per AS NZS 3000-2007 Amdt 2-2012 (plus it is less than 100mm)
Let's get a bit technical shall we
Skimmer Box Overflow Control
Why Invisiskim?
The purchase price of our Polymer Pool Skimmer Control System is reasonable and unique.
Why Invisiskim?
Longer lasting thermo-plastic is used which is UV stabalised for a longer lifespan.
Why Invisiskim?
Our design includes unique features like a fully removable large threaded cap and
low profile design
Why Invisiskim?
Our Skimmer box glue-in Air Controls are suited for
25mm (1") uPVC pipe
(that would be glued into to skimmer box from the outside etc)
Why Invisiskim?
The ASA Thermoplastic used is as strong as ABA plastic but has the added benifet of being UV Stabalised and more
water resistant
Why Invisiskim?
Comes is White and Grey colours to blend with modern grey
skimmer boxes
Why ASA?
ASA (Acrylonitrile Styrene Acrylate) has very good Mechanical & Thermal Behavior. It’s tensile strength is typically around 40–50 MPa. It has a very high HDT (Heat Deflection Temperature) around 90 °C so is compatible with full sun and the elements. It has excellent impact resistance and durability in outdoor exposure. ASA is UV, Weather & Chemical Resistant. The acrylate component gives ASA superior UV resistance and less yellowing than ABS under sunlight. It also resists water, moisture, and many cleaning agents/chemicals
Why Invisiskim?
Fully Non conductive so no need for an electrician to connect an earth wire as per AS NZS 3000-2007 Amdt 2-2012
(plus it is less than 100mm)
Invisiskim
Ask your pool builder about Invisiskim today.
Get in touch
Location
73-75 Giffin Road
White Rock Qld 4868
Contact Us
Phone : 0419 486 241
Email : info@invisiskim.com.au
Our Hours
By Appointment Only
Follow Us